May 29, 2021
Wirtgen DC2000 Return Roller
Shaft size 38mm 
Setting roller on Lathe Machine 
Puchong Return roller for cold milling machine
Wirtgen DC2000 Return Roller in Puchong, Selangor, Malaysia.
We fabricate wirtgen return roller here in Puchong, Selangor Darul Ehsan.
The middle shaft is 38mm while the 9 rods surrounding are 20mm rod.
1. Specification
| PRODUCT NAME | WIRTGEN DC2000 RETURN ROLLER | |
| SHAFT SIZE | 38 | mm |
| LENGTH | 1000 | mm |
| ROD NUMBER | 9 X M20 | nos |
| WELDING | FULL | |
| DIAMETER | 150 | mm |
| DIAMTER 2 | 170 | mm |
2. Gallery – Cold Milling return roller
3. Square-shaft Wirtgen Return roller @ Puchong
| PRODUCT NAME | WIRTGEN DC2000 RETURN ROLLER | |
| SHAFT SIZE | 50 | mm |
| LENGTH | 1000 | mm |
| ROD NUMBER | 9 X M25 | nos |
| WELDING | FULL | |
| DIAMETER | 150 | mm |
| DIAMTER 2 |
- square shafts allow stronger grip
- wide gaps in between shaft, stone particles do not get stuck within
4. Where exactly is the part?
The return roller is at the base of the slanting conveyor belt.
We also supply sweeper brush for Bobcat and Ford 5000 Back pusher Angle Sweeper. Check out our homepage here.
Facebook: https://www.facebook.com/omeonemachine
Do you have similar roller with different dimension? Let us know today!
ONE MACHINE ENGINEERING SDN BHD
NO 28, JALAN TPP 5/10, TAMAN PERINDUSTRIAN PUCHONG, 47100 PUCHONG, SELANGOR DARUL EHSAN.
Tel: 03 8051 8761
Email: liew.onemachine@gmail.com
Whatsapp: 016 9159 608
Author: Kristen Liew
Updated on May 2021